| R - Cone Backface To Clear Radius1 | 3.560 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 2680 lbf |
| Cg - Geometry Factor | 0.0577 |
| Db - Cup Backface Backing Diameter | 51.05 mm |
| Da - Cup Frontface Backing Diameter | 55.10 mm |
| a - Effective Center Location3 | -5.1 mm |
| db - Cone Backface Backing Diameter | 37.59 mm |
| r - Cup Backface To Clear Radius2 | 1.52 mm |
| Cone Part Number | 15579X |
| Aa - Cage-Cone Backface Clearance | 0 mm |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 1590 lbf |
| K - Factor7 | 1.69 |
| C0 - Static Radial Rating | 11300 lbf |
| Series | 15500 |
| D | 60.325 mm |
| Design Units | Imperial |
| e - ISO Factor8 | 0.35 |
| da - Cone Frontface Backing Diameter | 30.99 mm |
| G2 - Heat Generation Factor (Rib-Roller End) | 10.3 |
| G1 - Heat Generation Factor (Roller-Raceway) | 12.7 |
| SHS35C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[135-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Series | Size (mm):15x35x11; d:15,000 mm; Outer Diameter (mm):35,000; Bore Diameter (mm):15,000; B:11,000 mm; D:35,000 mm; Width (mm):11,000; C:11,000 mm; Bearing number:6202ZG15B; |
| SHS35C[1,2,3,4,5,6,7,8,9]C[0,1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series | Cur:4450 N / Fatigue lim; nG:6800 1/min / Limitin; da min:74 mm; Size (mm):60x150x35; D1:126,3 mm; Outer Diameter (mm):150; d:60 mm; nB:6400 1/min / Referen; ra max:2,1 mm; d1:95,1 mm; m:2,83 kg / Weight; C0r:69000 N / Static loa; B:35 mm; Bore Diameter (mm):60; rmin:2,1 mm; Da max:136 mm; Width (mm |
| SHS35C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series | Basic static load rating (C0):1740 kN; Width (mm):90; d:950 mm; Bearing number:618/950; Outer Diameter (mm):1150; B:90 mm; Basic dynamic load rating (C):701 kN; Bore Diameter (mm):950; D:1150 mm; C:90 mm; Weight:190 Kg; Size (mm):950x1150x90; (Grease) Lubrication Speed:360 r/min; |
| SHS35LC[1,2,3,4,5,6,7,8,9]+[165-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series | A:50 mm; Da max:110 mm; T1:52 mm; da min:116 mm; Width (mm):52; nG:2460 1/min / Limitin; Bore Diameter (mm):80; rmin:1,5 mm; ra max:1,5 mm; m1:0,57 kg / Weight, se; Bearing number:53316 + U316; C0a:360000 N; Size (mm):80x145x52; T:47,6 mm; D2:110 mm; A:0,8 / Factor min. lo; C:15 mm; R:112 mm; D3:145 |
| SHS35C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[135-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Series | Mass bearing:0.23 kg; r1,2 min.:1.1 mm; Basic dynamic load rating - C:23.4 kN; ra - max.:1 mm; Outer Diameter (mm):25; da max.:36.5 mm; Basic static load rating - C0:11.6 kN; d:25 mm; B:17 mm; da min.:32 mm; da - min.:32 mm; Limiting speed:100 r/min; r1,2 - min.:1.1 mm; d1:36.6 mm; Basic static load |
| SHS35LC[1,2,3,4,5,6,7,8,9]+[165-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Series | D1:45,212 mm; Width (mm):47; C0a:225000 N / Static lo; Outer Diameter (mm):95; Ca:29700 lbf / Dynamic; D:95 mm; Bore Diameter (mm):45; D1:1,78 inch; T:47 mm; Ca:132000 N / Dynamic l; Size (mm):45x95x47; Bearing number:1009; T:1,85 inch; D:3,74 inch; m:3,58 lbs / Weight; C0a:51000 lbf / Static l; m:1 |
| SHS35C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[135-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series | ID Chamfer Angle (B deg.):35; Shaft Size (ds) - 12 +0 / -0.027:12 +0 / 0.027; Bore Diameter (mm):12; OD Chamfer Length (Co):0.600; Bearing Bore after Mounting (di):12 +0.148 / +0.010; Bearing Outside Diameter, Nominal(Do):14.000; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Leng |