| Cage Type | Stamped Steel |
| D1 - Flange Outer Diameter | 3.3330 in |
| C - Cup Width | 0.7018 in |
| G1 - Heat Generation Factor (Roller-Raceway)10 | 26.5 |
| db - Cone Backface Backing Diameter | 1.57 in |
| Series | 335 |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2570 lbf |
| G2 - Heat Generation Factor (Rib-Roller End) | 13 |
| R - Cone Backface To Clear Radius1 | 0.03 in |
| D | 3.1496 in |
| B - Cone Width | 0.8820 in |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 5490 lbf |
| Design Units | Imperial |
| Cone Part Number | 346 |
| da - Cone Frontface Backing Diameter | 1.56 in |
| Cg - Geometry Factor11 | 0.0676 |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 21200 lbf |
| Ab - Cage-Cone Frontface Clearance | 0.07 in |
| Bearing Weight | 1.1 lb |
| K - Factor7 | 2.14 |
| 2HR2042[F(AP-C),F(AP-CF),F(AP-HC)]+[93-2200/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Appropriate Withdrawal Nut No.:HM52; L11:195.00 mm; Weight:12.50 Kg; Taper:1:12; Appropriate Hydraulic Nut:HMV52; Thread D12:Tr260x4; L:180.00 mm; d1:220.00 mm; b:20 mm; |
| 2HR1530M+[70-800/1]L[H,P,SP,UP]M THK Separated Linear Guide Side Rails Set Model HR | Bore Diameter (mm):105; Min. Housing Shoulder Dia., Outer (Uo):179.000; Weight (g):3,730.00; Material:52100 Chrome steel (; Outer Diameter (mm):190; Bearing number:6221ZZ; Max Speed (Grease) (X1000 RPM):4; Bore Dia (d):105.0000; Max Speed (Oil) (X1000 RPM):4; Size (mm):105x190x36; Radius (min) (rs): |
| 2HR1530M[F(AP-C),F(AP-CF),F(AP-HC)]+[70-800/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR | Basic dynamic load rating (C):5,72 kN; E:19,5 mm; Width (mm):80; Outer Diameter (mm):62; Bore Diameter (mm):40; Weight:0,3 Kg; Angle (α):56 °; B:80 mm; d:40 mm; B1:56 mm; Size (mm):40x62x80; Bearing number:KNO4080; D:62 mm; |
| 2HR1530M+[70-800/1]LM THK Separated Linear Guide Side Rails Set Model HR | Factor (G1):42; T1:7,938 mm; B:21,946 mm; C:17,826 mm; Basic dynamic load rating (C1):84,2 kN; db:69 mm; Basic static load rating (C0):107 kN; Bore Diameter (mm):57,531; R:3,6 mm; Calculation factor (e):0,35; Outer Diameter (mm):96,838; Size (mm):57.531x96.838x21.946; a -:3 mm; C2:4,762 mm; D1:101,4 |
| 2HR1530M[F(AP-C),F(AP-CF),F(AP-HC)]+[70-800/1]L[F(AP-C),F(AP-CF),F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR | da max:214 mm; S:10,2 mm; Bearing number:NU2334-EX-M1; B:120 mm; Basic dynamic load rating (C):1500 kN; db min:218 mm; ra max.:3 mm; Outer Diameter (mm):360; d1:– mm; C:120 mm; ra1 max.:3 mm; D1:303 mm; Bore Diameter (mm):170; Basic static load rating (C0):2080 kN; r1 min.:4 mm; D:360 mm; E:320 mm; |
| 2HR1530M[F(AP-C),F(AP-CF),F(AP-HC)]+[70-800/1]LM THK Separated Linear Guide Side Rails Set Model HR | Ew:64,500 mm; Bc:34,000 mm; Fw:44,500 mm; Outer Diameter (mm):64,500; Bearing number:PK44.5X64.5X34; Bore Diameter (mm):44,500; |
| 2HR2042[F(AP-C),F(AP-CF),F(AP-HC)]+[93-2200/1]L THK Separated Linear Guide Side Rails Set Model HR | d:12 mm; C:70 mm; A:42 mm; D:22 mm; Bearing number:KTFN 12 C-PP-AS; C3:10 mm; Weight:0,2 Kg; H7:13 mm; C7:35 mm; D1:30 mm; Thread (K2):M6; H:34 mm; H1:24 mm; Bore Diameter (mm):12; Basic dynamic load rating (C):1,27 kN; Outer Diameter (mm):22; D2:29,8 mm; A1:32 mm; K8:5,3 mm; Thread (K8):M8X1; |
| 2HR1530M[F(AP-C),F(AP-CF),F(AP-HC)]+[70-800/1]L[H,P,SP,UP]M THK Separated Linear Guide Side Rails Set Model HR | B:18,288 mm; Outer Diameter (mm):50,005; Width (mm):17,526; Bearing number:M12649/10; T:17,526 mm; d:21,43 mm; C:13,97 mm; D:50,005 mm; Size (mm):21.43x50.005x17.526; Bore Diameter (mm):21,43; a:6,4 mm; |